Nelsonfoto Forums
February 10, 2012, 06:08:22 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: ShopTalk Chat Room is Now On-Line
http://nelsonfoto.com/SMF/shoptalk/
 
   Home   Help Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Leaf Shutters & flash  (Read 1931 times)
0 Members and 1 Guest are viewing this topic.
craigh
Frequent Contributor
***
Offline Offline

Posts: 200


View Profile
« on: January 14, 2008, 06:45:21 PM »

Now that I got the Mamiya RB67 & the C220 I got from Griz a week ago, I'm wondering how I can use electronic flash with these beasts?  Can I shoot at 1/60 or 1/125 as if I was shooting with a 35mm SLR?  

Craig
Logged

Digital is good for computers & telephones, NOT for photography & music.  Digital is Pixelography (Nothing wrong with that).
Glenn Thoreson
The old grouch
Prolific Poster
*****
Offline Offline

Posts: 6726


View Profile
« Reply #1 on: January 14, 2008, 07:00:41 PM »

Yer in luck! Leaf shutters will sync with electronic flash at any speed. Some do have a setting for flash bulbs, however. It would be labled "M". If it has it, don't use that with electronic flash. Be sure to always use the "X" setting.
Logged

Glenn from Wyoming

"I reject your reallity and substitute my own"
( Adam Savage )
ImageMaker
B&W Geek
Prolific Poster
*****
Offline Offline

Posts: 5990


View Profile
« Reply #2 on: January 14, 2008, 07:19:12 PM »

To elaborate a little, if (for whatever reason) you *are* using actual magnesium-filled flashbulbs with a leaf shutter that has only X synch (or is unmarked and made after about 1955, maybe earlier), you need to shoot at 1/30 or slower to avoid cutting off most of the flash.  Shoot at 1/125 with a bulb on X, and you'll get a guide number about 1/10 what it would be at 1/30.  Even 1/30 trims a little off the tail, though not enough to make much difference; 1/25 is long enough to get more than 95% of the light even on X.
Logged

Never let yourself spend 25 years away from the darkroom...
craigh
Frequent Contributor
***
Offline Offline

Posts: 200


View Profile
« Reply #3 on: January 14, 2008, 07:28:28 PM »

I plan on using my Sunpak Auto 522.

Craig
Logged

Digital is good for computers & telephones, NOT for photography & music.  Digital is Pixelography (Nothing wrong with that).
Mike Kovacs
Knutty butt nice
Prolific Poster
*****
Offline Offline

Posts: 7054


View Profile
« Reply #4 on: January 15, 2008, 06:37:25 AM »

Set your lenses to X (if it has an M/X switch) and blast away at any shutter speed you like.

PS I assume that you have a PC cord
Logged

Kin Lau
What darkslide?
Prolific Poster
*****
Offline Offline

Posts: 1137


View Profile
« Reply #5 on: January 15, 2008, 12:05:24 PM »

@ Mike, the Sunpak 522 is a potato-masher type, and only works with PC cords.

@ Craig, I haven't used my 522 with my TLR, but I have used it with my Speed Graphics (lens shutter, not rear shutter), and it works just fine at any shutter speed.
Logged

I started with nothing... I still have most of    it.
craigh
Frequent Contributor
***
Offline Offline

Posts: 200


View Profile
« Reply #6 on: January 15, 2008, 03:46:20 PM »

Thank you for your answers.

Craig
Logged

Digital is good for computers & telephones, NOT for photography & music.  Digital is Pixelography (Nothing wrong with that).
ray*j*gun
Guest
« Reply #7 on: May 23, 2008, 04:02:18 PM »

I have used my Sunpak with my c220 for years and its a great set up. Plus you can always drive nails with rig if you need to.

My first post here. Look fwd to future interaction.

Ray
Logged
Greg M
Prolific Poster
*****
Offline Offline

Posts: 655


View Profile
« Reply #8 on: August 28, 2008, 10:50:25 AM »

Good posts with good information.  Switching back and forth from focal plane shutters( 35mm) and leaf shutter (medium format) cameras always caused some problems for me.  I still have a tendency to under-expose when using a electronic flash on a leaf shutter.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!